====== RRR ====== Ordenador de sobremesa donado por Diego. Sucesor de [[informatica:hardware:pazair|Pazair]]. ^ Componente ^ Producto ^ | Placa base | [[https://www.gigabyte.com/Motherboard/GA-H77-D3H-rev-11|Gigabyte GA-H77-D3H]] | | CPU | [[https://ark.intel.com/content/www/es/es/ark/products/65719/intel-core-i73770-processor-8m-cache-up-to-3-90-ghz.html|Intel Core i7-3770]] 3,4 GHz | | Memoria RAM | 16 GB (máx 4x8GB) DDR3 1333 MHz | | Almacenamiento | SSD Samsung EVO 970 de 1 TB | | Almacenamiento | Disco de 3,5" Seagate 2 TB | | Tarjeta gráfica | [[https://www.nvidia.com/es-la/geforce/products/10series/geforce-gtx-1050/|NVIDIA GeForce GTX 1050 Ti]] | | Fuente de alimentación | | ===== CPU ===== [[https://ark.intel.com/content/www/es/es/ark/products/65719/intel-core-i73770-processor-8m-cache-up-to-3-90-ghz.html|Intel Core i7-3770]] ^ Característica ^ Valor ^ | Socket | LGA 1155 | | Frecuencia | 3,40 - 3,90 GHz | | Núcleos | 4 | | Hilos | 8 | | Chip gráfico | Intel 4000 | | Conjunto de instrucciones | 64 bits | | Virtualización | Sí | | TDP | 77 W | | Año lanzamiento | 2012 | ===== Placa base ===== https://www.gigabyte.com/Motherboard/GA-H77-D3H-rev-11/sp#sp * CPU: soporte para Intel Core i3, i5, i7, Pentium y Celeren * Socket: LGA1155 * RAM: * 4 x 1.5V DDR3 DIMM 2200(OC)/1600/1333/1066 MHz. * 32 GB máximo (4 x 8 GB). * Architectura Dual Channel. * Gráficos: * 1 x D-SUB * 2 x DVI-D * 1 x HDMI * Audio: * 7.1 * Códec VT2021 * Salida S/PDIF * LAN: Atheros 10/100/1000 Mbit * Expansión: * 1 x PCI Express 3.0 x16 funcionando a x16 * 1 x PCI Express 3.0 x16 funcionando a x4 * 3 x PCIE Express x1 * 2 x PCI * Almacenamiento: * 2 x SATA 6Gb/s connectors (SATA3 0/SATA3 1) supporting up to 2 SATA 6Gb/s devices * 4 x SATA 3Gb/s connectors (SATA2 2~SATA2 5) supporting up to 4 SATA 3Gb/s devices * 1 x mSATA connector * Soporte para RAID 0, RAID 1, RAID 5 y RAID 10 * USB: * 4 x USB 3.0/2.0 ports (2 ports on the back panel, 2 ports available through the internal USB header) * 10 x USB 2.0/1.1 ports (4 ports on the back panel, 6 ports available through the internal USB headers) * Conectores I/O: * 1 x 24-pin ATX main power connector * 1 x 8-pin ATX 12V power connector * 2 x SATA 6Gb/s connectors * 4 x SATA 3Gb/s connectors * 1 x mSATA connector * 1 x CPU fan header * 3 x system fan headers * 1 x front panel header * 1 x front panel audio header * 1 x S/PDIF Out header * 1 x USB 3.0/2.0 header * 3 x USB 2.0/1.1 headers * 1 x serial port header * 1 x Clear CMOS jumper * 1 x Trusted Platform Module (TPM) header * Conectores panel trasero: * 1 x PS/2 keyboard/mouse port * 1 x D-Sub port * 1 x DVI-D port * 1 x HDMI port * 4 x USB 3.0/2.0 ports * 4 x USB 2.0/1.1 ports * 1 x RJ-45 port * 1 x optical S/PDIF Out connector * 5 x audio jacks (Center/Subwoofer Speaker Out, Rear Speaker Out, Side Speaker Out, Line In/Mic In, Line Out) * BIOS: * 2 x 64 Mbit flash. * AMI EFI BIOS. * Soporte de DualBIOS. * Factor de forma: ATX ===== Tarjeta gráfica ===== [[https://www.nvidia.com/es-la/geforce/products/10series/geforce-gtx-1050/|NVIDIA GeForce GTX 1050 Ti]] ^ Característica ^ Valor ^ | Frecuencia | 1290 - 1392 MHz | | Frecuencia Memoria | 4 GB GDDR5 | | Velocidad memoria | 7 Gbps | | OpenGL | 4.5 | | Vulkan API | Sí | | Bus | PCIe 3.0 | | Resolución máxima | 7680x4320@60Hz2 | | Conectores de vídeo | DP 1.4, HDMI 2.0, Dual Link-DVI | | Potencia | 75 W | | Fuente recomendada | 300 W | ===== Sistema Operativo ===== Instalo Arch Linux. Durante la instalación es recomendable instalar un gestor de red como NetworkManager (''networkmanager'') Los drivers para la tarjeta gráfica se instalan mediante el paquete ''nvidia''. [[https://nouveau.freedesktop.org/CodeNames.html#NV110|Nombres en código]] de las tarjetas gráficas de NVIDIA para saber a la familia que pertenecen e instalar los drivers adecuados. ===== Changelog ===== **02/12/2022** Formateo los discos e instalo Arch Linux. **29/10/2022** Limpieza interior del equipo. **28/10/2022** Diego me regala el PC porque se compró uno nuevo.