Diferencias

Muestra las diferencias entre dos versiones de la página.

--- informatica:domotica:wxkg01lm [2021/09/13 18:08] – creado tempwin
+++ informatica:domotica:wxkg01lm [2024/02/29 22:41] (actual) – [Interruptor inalámbrico WXKG01LM] tempwin
@@ Línea 1: / Línea 1: @@
-====== WXKG01LM ======
+====== Interruptor inalámbrico WXKG01LM ======
 Interruptor inalámbrico
+{{ https://www.zigbee2mqtt.io/images/devices/WXKG01LM.png |}}
 ===== Información técnica =====
@@ Línea 10: / Línea 11: @@
   * Rango de operación:
     * Temperatura: -10 ºC ~ 50 ºC (precisión de ±0,3 ºC)
-  * Marca: Aqara
+  * Marca: Xiaomi
   * Batería: CR2032
@@ Línea 17: / Línea 18: @@
 Se utiliza a través del add-on **zigbee2mqtt**
-Emparejar:
+Para emparejar hay que mantener pulsado el botón de LINK (al lado de la pila) hasta que se encienda el LED azul. Si no se encendiese en 5 segundos, seguir con el botón pulsado y tan pronto se encienda el LED, pulsar el interruptor varias veces hasta que vuelva a encenderse el LED.
 <code>
+Zigbee2MQTT:info  2024-02-29 21:38:42: Device '0x00158d0002c7ca22' joined
+Zigbee2MQTT:info  2024-02-29 21:38:42: MQTT publish: topic 'zigbee2mqtt/bridge/event', payload '{"data":{"friendly_name":"0x00158d0002c7ca22","ieee_address":"0x00158d0002c7ca22"},"type":"device_joined"}'
+(...)
+Zigbee2MQTT:debug 2024-02-29 21:38:43: Saving state to file /config/zigbee2mqtt/state.json
+Zigbee2MQTT:info  2024-02-29 21:39:06: Successfully interviewed '0x00158d0002c7ca22', device has successfully been paired
+Zigbee2MQTT:info  2024-02-29 21:39:06: Device '0x00158d0002c7ca22' is supported, identified as: Xiaomi Mi wireless switch (WXKG01LM)
+Zigbee2MQTT:info  2024-02-29 21:39:06: MQTT publish: topic 'zigbee2mqtt/bridge/event', payload '{"data":{"definition":{"description":"Mi wireless switch","exposes":[{"access":1,"category":"diagnostic","description":"Remaining battery in %, can take up to 24 hours before reported","label":"Battery","name":"battery","property":"battery","type":"numeric","unit":"%","value_max":100,"value_min":0},{"access":1,"description":"Triggered action (e.g. a button click)","label":"Action","name":"action","property":"action","type":"enum","values":["single","double","triple","quadruple","hold","release","many"]},{"access":1,"category":"diagnostic","description":"Voltage of the battery in millivolts","label":"Voltage","name":"voltage","property":"voltage","type":"numeric","unit":"mV"},{"access":1,"category":"diagnostic","description":"Number of power outages","label":"Power outage count","name":"power_outage_count","property":"power_outage_count","type":"numeric"},{"access":1,"category":"diagnostic","description":"Link quality (signal strength)","label":"Linkquality","name":"linkquality","property":"linkquality","type":"numeric","unit":"lqi","value_max":255,"value_min":0}],"model":"WXKG01LM","options":[{"access":2,"description":"The WXKG01LM only reports a button press and release.By default, a hold action is published when there is at least 1000 ms between both events. It could be that due to delays in the network the release message is received late. This causes a single click to be identified as a hold action. If you are experiencing this you can try experimenting with this option (e.g. set it to 2000) (value is in ms).","label":"Hold timeout","name":"hold_timeout","property":"hold_timeout","type":"numeric","value_min":0},{"access":2,"description":"Sometimes it happens that the button does not send a release. To avoid problems a release is automatically send after a timeout. The default timeout is 4000 ms, you can increase it with this option (value is in ms).","label":"Hold timeout expire","name":"hold_timeout_expire","property":"hold_timeout_expire","type":"numeric","value_min":0},{"access":2,"description":"Set to false to disable the legacy integration (highly recommended), will change structure of the published payload (default true).","label":"Legacy","name":"legacy","property":"legacy","type":"binary","value_off":false,"value_on":true}],"supports_ota":false,"vendor":"Xiaomi"},"friendly_name":"0x00158d0002c7ca22","ieee_address":"0x00158d0002c7ca22","status":"successful","supported":true},"type":"device_interview"}'
 </code>
+En ''/homeassistant/zigbee2mqtt/database.db'' se guardan los dispositivos que se añaden al coordinador.
 En ''/share/zigbee2mqtt/devices.yaml'' se incluye con el identificador que le da zigbee2mqtt tras emparejarse, pero podemos indicar un nombre más representativo con ''friendly_name'':